HRG Series 2

  • A neutral-grounding resistor with optional pulsing function
  • NGR-failure detection with NGRM series or RC48N NGR monitors
  • Multi-feeder ground-fault detection with locating feature
  • Line-voltage monitoring with NGRM700
  • Front-panel information and programming displays
  • Standard network communications
  • Floor-mount control cabinet with top or remote mounted NGR enclosure

BHRG Series 2 HRG systems integrate a neutral-grounding resistor (NGR) assembly with pulsing function and NGR monitoring; individual ground-fault detection for up to 60 circuits with optional network communications via a COM465IP gateway or CP900-I series Gateway/HMI. Monitoring, display, and control components are housed in a floor-mount enclosure—the NGR assembly mounts on the control cabinet or at another location.

NGR monitoring is with an RC48N Ground-Fault & NGR Monitor, an NGRM500 Neutral-Grounding-Resistor Monitor, or an NGRM700 Neutral-Grounding-Resistor Monitor. The former provides basic AC ground-fault and open-NGR detection. The NGRM series adds AC/DC ground-fault detection, harmonic analysis, NGR-short detection, phase-voltage monitoring (NGRM700), and a graphical user interface (detachable with NGRM700).

Bender RCMS460 or RCMS490 ground-fault monitors provide multiple-feeder monitoring to detect AC and DC (optional) faults in up to 12 circuits per device. The RCMS460 has common relay outputs; the RCMS490 adds dedicated relay outputs for each monitored channel (required for tripping systems). Each BHRG Series 2 unit can be configured with up to five RCMS monitors—60 circuits.

All variants include front-panel pilot lights to indicate control-voltage presence and relay alarm state, and may include switches for test, reset, and pulse-enable functions. Lower feature/cost units with RC48N NGR Monitor can be equipped with analog gauges for front-panel neutral-voltage and -current indication.

Options include an audible alarm, portable pulse detector, and a neutral-disconnect switch.

The Bender Inside Sales team is available to assist with selection of CT’s for the feeders.

Questions? Contact us!

HRG Series 2
  • A neutral-grounding resistor with optional pulsing function
  • NGR-failure detection with NGRM series or RC48N NGR monitors
  • Multi-feeder ground-fault detection with locating feature
  • Line-voltage monitoring with NGRM700
  • Front-panel information and programming displays
  • Standard network communications
  • Floor-mount control cabinet with top or remote mounted NGR enclosure

BHRG Series 2 HRG systems integrate a neutral-grounding resistor (NGR) assembly with pulsing function and NGR monitoring; individual ground-fault detection for up to 60 circuits with optional network communications via a COM465IP gateway or CP900-I series Gateway/HMI. Monitoring, display, and control components are housed in a floor-mount enclosure—the NGR assembly mounts on the control cabinet or at another location.

NGR monitoring is with an RC48N Ground-Fault & NGR Monitor, an NGRM500 Neutral-Grounding-Resistor Monitor, or an NGRM700 Neutral-Grounding-Resistor Monitor. The former provides basic AC ground-fault and open-NGR detection. The NGRM series adds AC/DC ground-fault detection, harmonic analysis, NGR-short detection, phase-voltage monitoring (NGRM700), and a graphical user interface (detachable with NGRM700).

Bender RCMS460 or RCMS490 ground-fault monitors provide multiple-feeder monitoring to detect AC and DC (optional) faults in up to 12 circuits per device. The RCMS460 has common relay outputs; the RCMS490 adds dedicated relay outputs for each monitored channel (required for tripping systems). Each BHRG Series 2 unit can be configured with up to five RCMS monitors—60 circuits.

All variants include front-panel pilot lights to indicate control-voltage presence and relay alarm state, and may include switches for test, reset, and pulse-enable functions. Lower feature/cost units with RC48N NGR Monitor can be equipped with analog gauges for front-panel neutral-voltage and -current indication.

Options include an audible alarm, portable pulse detector, and a neutral-disconnect switch.

The Bender Inside Sales team is available to assist with selection of CT’s for the feeders.

Questions? Contact us!

Features

  • A neutral-grounding resistor with optional pulsing function
  • NGR with seismic certification available
  • NGR-failure detection with NGRM-series or RC48N NGR monitors
  • Multi-feeder ground-fault detection with locating feature
  • Line-voltage monitoring with NGRM700
  • Front-panel information and programming displays
  • Standard network communications
  • Floor-mount control cabinet with top or remote mounted NGR enclosure

HRG Series 2 Variant(s)

For assistance with ordering please contact Industrial.Sales@Bender-us.com or call (610) 383-9200.

Downloads for HRG Series 2

NameCategorySizeLanguageTimestampD-/B-Number
HRG Series 2 Guideform Specification Datasheets 90.5 KB EN2022/10/1717.10.20220
How to Size an NGR (US) Technical Information 424.0 KB EN2019/05/1313.05.2019
HRG & LRG Systems (US) Product Brochures 5.2 MB EN2020/03/0505.03.2020
NGR Checklist (US) Technical Information 245.3 KB EN2022/11/0707.11.2022
Guideline on NGRM Relay Testing Technical Information 522.3 KB EN2021/10/2626.10.2021