Operating Rooms

Modular Isolated Power Panels

For electrical safety in operating rooms

Modular Isolated Power Panels

BENDER Isolated Power Systems are depended on by thousands of healthcare facilities in more than 40 countries. Isolated Power Panels, Line Isolation Monitors (LIMs) and Accessories are installed in NFPA 99 defined "wet procedure locations" including Operating Rooms, ICUs, Cardio Cath Labs, LDRs and more.

Isolated Power Planning Guide
Modular Isolated Power Panels Datasheet
  • UL 1047
  • UL 1022
  • UL 50
  • CSA C22.1 Part 1
  • CSA C22.2 No. 204

Ground and Power Modules

provide power receptacles and/or groundjacks for critical care areas

GPM Series

BENDER series GPM ground and power modules provide a combination of hospital grade power receptacles and/or ground jacks to satisfy the requirements of general and critical care areas. Straight blade (single or duplex) and twist-to-lock receptacles may be provided. Also available are hospital grade ground cords to facilitate the implementation of an equipotential environment.

Ground and power modules are designed in strict compliance with UL467, UL50, the NFPA 70 (National Electric Code), and NFPA 99.

Isolated Power Planning Guide
Ground Power Modules and Accessories

Recommended Ground and Power Modules:

  • Ground Cord/ Ground Jack: UL 467
  • GPM/XRM: UL 1047

Clocks and Timers

are an essential part of every operating room

Clocks and Timers (ZT1590RS)

Digital Clocks and Timers, Surgical Chronometers, and Clock and Timer Remotes for Healthcare Facilities

Clocks and timers datasheet
Isolated Power Planning Guide

Recommended Clocks and Timers

  • UL 863
  • "Time-Indicating and -Recording Appliances CAN/CSA-C22.2 No. 0
  • "General Requirements - Canadian Electrical Code, Part II

Testing Equipment

is essential to any fully functional operating room

Testing Equipment (LT3000)

NFPA 99 requires that line isolation monitor (LIM) and ground fault circuit interrupter (GFCI) tests be conducted at regular intervals. Our testing equipment assists in testing both the line isolation monitor and ground fault circuit interrupter and helps to ensure your facility and its appliances pass all of the required compliance regulations.

Isolated Power Planning Guide
LT3000 Datasheet

Recommended Testing Equipment:

Remote Indicators/Nursing Stations

are vitally important for hospital operating rooms

Remote Indicator (MK2000CBM)

Remote Indicators For Line Isolation Monitors and Fault Location

Isolated Power Planning Guide
Remotes Med Datasheet

Recommended Remote Indicators and Nursing Stations

  • UL 1022
  • CSA C22.2 No. 204

Line Isolation Monitors

are necessary for measuring the Total Hazard Current in an isolated AC system.

Line Isolation Monitor

Line Isolation Monitor (LIM) measures the Total Hazard Current (THC) in an isolated (ungrounded) AC system. The Total Hazard Current is calculated by measuring the system‘s leakage impedance to ground. 

Isolated Power Planning Guide
Line Isolation Monitor Datasheet

Line Isolation Monitors

  • UL 1022
  • CSA C22.2 No. 204